This page contains drivers for SlimSCSI APA-148A manufactured by Adaptec. For use CD-ROM you will also need to load MSCDEX.EXE in your AUTOEXEC.BAT.1 INSTALLATION GUIDE MegaRAID IDE 66/100/133 Controller FreeBSD October 2002Adaptec SlimSCSI APA-148A Windows Driver. However APA-1460 Enabler may provide support of Adaptec APA-1460 SCSI Host Adapter cards and SCSI devices without load any additional drivers. ASPI manager and required drivers could be found in the Adaptec EZ-SCSII package. SCSI Disk ASPIDISK.SYS, etc.There are and will be no Windows Vista, Windows 7 and Windows Server 2008 drivers available for the APA-1460x, these PCMCIA cards are not supported under Vista or. There are no Windows Server 2003 drivers available for the APA-1460x or the APA-1480x. This and other Motherboards drivers we're hosting are 100 safe.Once the driver is installed, there is nothing more that you need to do for the controller.
Copyright 2002 by LSI Logic Corporation. LSI Logic does not assume any responsibility or liability arising out of the application or use of any product described herein, except as expressly agreed to in writing by LSI Logic nor does the purchase or use of a product from LSI Logic convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of LSI Logic or third parties. LSI Logic Corporation reserves the right to make changes to any products herein at any time without notice. Document DB , First Edition (October 2002) This document describes the installation of FreeBSD for LSI Logic Corporation s MegaRAID IDE 66/100/133 controller and will remain the official reference source for all revisions/releases of these products until rescinded by an update. The information contained herein is not to be used by or disclosed to third parties without the express written permission of an officer of LSI Logic Corporation. Mac brush cleaner price3 Contents 1 Overview 1 2 Installing FreeBSD on the MegaRAID IDE RAID Controller Preparing Your System for Installation Preparing a Driver Update Diskette Installing FreeBSD 2 3 Installing the MegaRAID IDE Driver on an Existing System 4 4 Updating the Driver 6 5 Uninstalling the Driver 6 MegaRAID IDE Controller FreeBSD Installation Guide Copyright 2002 by LSI Logic Corporation. It will automatically recognize the SCSI card. All rights reserved.If you are using Windows XP, the drivers are embedded. CD To download the latest drivers and documentation, and to receive product literature, visit us at For a current list of our distributors, sales offices, and design resource centers, view our web page located at ii Copyright 2002 by LSI Logic Corporation. All other brand and product names may be trademarks of their respective companies. Microsoft, Windows NT, and Windows are registered trademarks of Microsoft Corporation. For additional information, refer to the following web site: 2 Installing FreeBSD on the MegaRAID IDE RAID Controller This section describes the installation of FreeBSD on the MegaRAID IDE controller. It provides advanced features for networking, security, and performance. FreeBSD is an operating system that can be used for x86-compatible, DEC Alpha, and PC-98 architectures. All rights reserved.5 MegaRAID IDE 66/100/133 Controller FreeBSD Installation Guide 1 Overview This document contains the instructions for installing and using the MegaRAID IDE RAID controller on a FreeBSD-4.5/4.6 system. Installing FreeBSD Perform the following steps to install FreeBSD: 2.1 Preparing Your System for Installation Step 3. Preparing the driver update diskette 3. Preparing your system for installation 2. ![]() Access the driver diskette image file with the appropriate driver version, fbsdimg. 2.2 Preparing a Driver Update Diskette Prepare a driver update diskette for the MegaRAID controller. After installation is complete, set SCSI as the first boot option for booting up the system. If your BIOS settings do not allow booting in the order listed above, set the BIOS to boot first from CDROM. SCSI Note: Refer to the BIOS documentation for instructions on setting the boot sequence. Insert a floppy diskette into the floppy drive and type the following (enter the appropriate driver version): # dd if=fbsd_.img 2.3 Installing FreeBSD Boot from the FreeBSD CD to begin installing FreeBSD. On a FreeBSD system, use the dd command to create the driver diskette. Run the program in a command window and follow the prompts. You can find this file on the FreeBSD CD, in the /tools directory. If there are no other SCSI devices, the device marked at BOOT (or HDD0 ) is known as /dev/da0. Note: The system device maps in the same order as shown in the BIOS setup menu. See the FreeBSD installation manual for more information. Type the following: boot Continue the normal installation steps. All rights reserved.7 BIOS driver C: is disk2 BIOS 636kB/74512kB available memory FreeBSD/i386 bootstrap loader, Revision Hit to boot immediately, or any other key for command prompt. Press the spacebar to stop the loader from autobooting when the following displays: BTX loader 1.00 BTX version is 1.01 Console: internal video/keyboard BIOS driver A: is disk0 BIOS driver B: is disk1 2 of 6 MegaRAID IDE Controller FreeBSD Installation Guide DB October 2002 Copyright 2002 by LSI Logic Corporation. Use the setup script postinstall on the driver disk to do this. All rights reserved.8 Before you complete installation, you must copy the mide driver module to the system. MegaRAID IDE Controller FreeBSD Installation Guide 3 of 6 DB October 2002 Copyright 2002 by LSI Logic Corporation. Insert the driver diskette in the floppy drive. 3 Installing the MegaRAID IDE Driver on an Existing System Perform the following steps if you are currently running FreeBSD and would like to access drives or arrays that are connected to the MegaRAID IDE controller. Press to return to the setup screen. Adaptec Slimscsi 1460A Code That Displays> /boot/defaults/ loader.conf This step installs the module and notifies the system about it. All rights reserved.9 The following is an example of the code that displays: F1 FreeBSD Default: F1 > FreeBSD/i386 BOOT Default: 0:ad(0,a)/boot/loader boot: BTX loader 1.00 BTX version is 1.01 Console: internal video/keyboard BIOS driver A: is disk0 BIOS driver C: is disk2 BIOS 636kB/74512kB available memory FreeBSD/i386 bootstrap loader, Revision 0.8 Loading /boot/defaults/loader.conf /kernel text=0x24fldb data=0x3007ec+0x2062c - / Hit to boot immediately, or any other key for command prompt. 4 of 6 MegaRAID IDE Controller FreeBSD Installation Guide DB October 2002 Copyright 2002 by LSI Logic Corporation. After it loads, you can access the drives as SCSI devices (if there are no other SCSI devices, the devices are listed as /dev/da0, /dev/da1, /dev/da2, and so on). If the module has loaded successfully, an LSI MegaIDE banner appears, along with a screen showing the attached drives. Insert the diskette into the floppy drive. Configure the system to mount the array automatically by modifying the file /etc/fstab and adding the following line to have the system mount /dev/da0s1e to location /mnt/mide after bootup: /dev/da1s1e/mnt/mide ext2 defaults Updating the Driver Perform the following steps to update the driver if you have more up-todate driver diskettes. The mide module should load automatically each time the system boots. All rights reserved.10 Step 5. MegaRAID IDE Controller FreeBSD Installation Guide 5 of 6 DB October 2002 Copyright 2002 by LSI Logic Corporation. 6 of 6 MegaRAID IDE Controller FreeBSD Installation Guide DB October 2002 Copyright 2002 by LSI Logic Corporation. Delete the following line in /boot/defaults/loader.conf: mide_load= YES Delete the driver module /modules/mide.ko. Perform the following steps to uninstall the driver. 5 Uninstalling the Driver You can uninstall the driver only when your system is not booting from a device that is attached to the MegaRAID IDE controller.
0 Comments
Leave a Reply. |
AuthorKatie ArchivesCategories |